What is a diamond face shape?
In our engine, a diamond face is one where the cheekbones are the widest point and everything else tapers away from them. The forehead is narrower than the cheekbones, and the jaw and chin narrow further still, so the outline reads as a soft or angular diamond.
The engine measures five distances on your face: face length, cheekbone width, forehead width, jaw width and chin width. Length, forehead, jaw and chin are each divided by cheekbone width, so the cheekbones act as the reference. That makes the result about proportion rather than the absolute size of your face.
The prototype for this shape is a narrow forehead, jaw and chin with the cheekbones as the widest point. Real faces sit on a spectrum, so you may see a little of a neighbouring shape in yours. That is normal, and every shape simply has its own features to work with.
- Cheekbones are the widest point, and the other widths are measured against them.
- Forehead width is a smaller fraction of cheekbone width. The calibration norm is about 0.858 (standard deviation 0.033), and diamond faces tend to sit toward the lower end.
- Jaw width is also well below the cheekbones. The norm is about 0.802 (standard deviation 0.029).
- Chin width is a small fraction of cheekbone width. The norm is about 0.333 (standard deviation 0.022), and diamond faces often read as relatively narrow here.
- Face length is measured along the midline from mid-forehead (not the hairline) to the chin. The norm is about 1.163 times cheekbone width (standard deviation 0.065).
- A typical face is about 1.16 times as long as it is wide on the mesh, with the middle 80% falling between 1.085 and 1.246.
- Because heights are measured along the midline, head roll in the photo does not distort the ratios.
| Measure | Diamond prototype | Average of 133 photos |
|---|---|---|
| Face length ÷ cheekbone width | 1.183 | 1.163 |
| Forehead width ÷ cheekbone width | 0.822 | 0.858 |
| Jaw width ÷ cheekbone width | 0.773 | 0.802 |
| Chin width ÷ cheekbone width | 0.311 | 0.333 |
How the detector reads a diamond face
The detector locates 478 landmarks with MediaPipe Face Landmarker, then works out the five distances and the four ratios against cheekbone width. It compares that pattern with each shape's prototype and reports the closest one. It also tells you how clear the call is: clear, closest, or between two shapes.
Photos are measured in your browser and are never uploaded for on-device tools. A quality check rejects images with no face, several faces, a face that is too small or too dark, or a head that is turned or tilted. For the best read, face the camera, keep your hair off your forehead and use even light. To see where you land, try the face shape detector.
Public figures often described as diamond-faced
Rihanna
Often described as having a diamond face, with prominent cheekbones and a narrower jaw and forehead. We have not measured her.
Vanessa Hudgens
Commonly cited as an example of a diamond shape, though descriptions vary by photo and angle.
Robert Pattinson
Often mentioned in style write-ups as having diamond-leaning proportions, with high cheekbones and a tapered jaw. This is an informal description, not a measurement.
Johnny Depp
Commonly cited in grooming articles as an example of a diamond-leaning face. These labels are subjective and we have not measured him.
Styling a diamond face
Hair
The aim is usually to add a little width at the forehead and jaw so the cheekbones sit in balance with them. Side-swept bangs, a fringe with some volume, or layers that start around the cheekbones can all do this. Chin-length bobs, soft waves at the jaw and shoulder-length layers add gentle width lower down.
If you like your cheekbones to take centre stage, hair tucked behind the ears or a sleek, slicked-back style shows them off. Short cuts work well when there is some volume on top, such as a textured crop or a quiff. These are options rather than rules, and the best cut is the one you enjoy wearing.
Glasses
Frames that are about as wide as your cheekbones, or slightly wider, tend to look natural. Oval and rounded frames soften the angles, while rimless or lightly rimmed styles keep the focus on your eyes.
Frames with detail along the top, such as browline styles, add a bit of width at the forehead. Very narrow frames can make the cheekbones look wider by contrast, so try a few shapes and see which feels like you.
Brows and makeup
Soft, gently curved brows with a mild arch suit the tapering lines of a diamond face. Brows that are very sharply angled can add emphasis to the angles already there, which some people like and others prefer to soften.
For makeup, blush placed slightly below the cheekbone and blended outward keeps the focus on them without adding more width. A touch of highlighter on the forehead and chin can add a little more presence at those narrower points. Lip colour, eye makeup and contour can all follow your own taste.
Accessories and hats
Earrings that add width at the jaw, such as drop or tapered styles, balance the cheekbone line. Wide-brimmed hats and beanies with some volume sit comfortably over a narrower forehead. Necklines with a bit of width, like boat or wide scoop necks, echo the same idea.
In photos, a slightly lower camera angle and good light on the forehead and chin can even out the proportions. Use whatever feels natural to you.
Diamond face shape FAQ
References
- Kartynnik, Y., Ablavatski, A., Grishchenko, I., & Grundmann, M. (2019). Real-time facial surface geometry from monocular video on mobile GPUs. arXiv:1907.06724. arxiv.org/abs/1907.06724
- Farkas, L. G., Hreczko, T. A., Kolar, J. C., & Munro, I. R. (1985). Vertical and horizontal proportions of the face in young adult North American Caucasians: Revision of neoclassical canons. Plastic and Reconstructive Surgery, 75(3), 328–337. doi.org/10.1097/00006534-198503000-00005
- Little, A. C., Jones, B. C., & DeBruine, L. M. (2011). Facial attractiveness: Evolutionary based research. Philosophical Transactions of the Royal Society B, 366(1571), 1638–1659. doi.org/10.1098/rstb.2010.0404