What is an oblong face shape?
In our engine, an oblong face is defined by proportion rather than by any single feature. The face is long, meaning its length is clearly greater than its width, and the forehead, cheekbones and jaw sit at a similar width, so the outline runs down in fairly even sides instead of widening or narrowing sharply.
To compare faces fairly, the detector measures five distances on a face mesh: face length, cheekbone width, forehead width, jaw width and chin width. Length, forehead, jaw and chin are each divided by cheekbone width, so the result describes shape and not how big a face is or how close it was to the camera. For reference, a typical face is about 1.16 times as long as it is wide on the mesh, and the middle 80% of faces fall between 1.085 and 1.246. An oblong face sits toward the longer end of that range.
One detail worth knowing: the top of the mesh is mid-forehead, not the hairline, and heights are measured along the midline, which removes the effect of a head rolled slightly to one side. So your hairline, hair volume or a high forehead do not change the length figure. Like every shape, oblong is simply a set of features to work with, not a rating of any kind.
- Length is clearly greater than cheekbone width; the mesh average for length is 1.163 with a standard deviation of 0.065, and oblong faces sit toward the high side of that.
- Forehead, cheekbone and jaw widths are similar, so the sides of the face look fairly straight rather than tapering.
- Forehead width is typically close to its mesh average of 0.858 times the cheekbone width (standard deviation 0.033).
- Jaw width is typically close to its mesh average of 0.802 times the cheekbone width (standard deviation 0.029).
- Chin width is measured the same way, with a mesh average of 0.333 and a standard deviation of 0.022.
- The prototype is one idea: a long face with even widths across the top, middle and lower face.
- In our 133-photo calibration set, 23 faces were oblong, but that describes the set and says nothing about how common the shape is in general.
| Measure | Oblong prototype | Average of 133 photos |
|---|---|---|
| Face length ÷ cheekbone width | 1.267 | 1.163 |
| Forehead width ÷ cheekbone width | 0.865 | 0.858 |
| Jaw width ÷ cheekbone width | 0.802 | 0.802 |
| Chin width ÷ cheekbone width | 0.335 | 0.333 |
How the detector reads an oblong face
The photo is measured in your browser with MediaPipe Face Landmarker, which places 478 points on the face. For on-device tools the photo is never uploaded. A quality check first rejects images with no face, more than one face, a face that is too small or too dark, or a head that is turned or tilted, because those would distort the distances.
From the five distances, the detector compares your ratios with each shape's prototype and reports the closest shape, along with how clear the call is: clear, closest, or between two shapes. If you land between oblong and a neighbor such as oval or square, that is a real result, since faces sit on a continuum. To see your own reading, try the face shape detector and use a straight-on, evenly lit photo.
Faces often associated with oblong
Sarah Jessica Parker
Often described as having a long face with fairly even width, a look commonly cited when people discuss oblong proportions.
Adam Driver
Commonly cited as an example of a long face with strong, straight sides; these are public descriptions, not our measurements.
Liv Tyler
Often described as having an elongated face with a softly even outline, though we have not measured her.
Alexander Skarsgard
Sometimes named in discussions of long, straight-sided faces; this is a common description and not a measurement.
Styling ideas for an oblong face
Hair: add width, soften length
Because the face is long, styles that add width at the sides tend to balance the proportions. Waves, curls, layers that start around the cheekbone and chin-to-shoulder cuts all create sideways volume. Side-swept or full fringes shorten the visual height of the forehead, while a center part with flat, very long hair draws the eye straight down and emphasizes length.
If you prefer short hair, keep some volume at the sides rather than at the crown; a textured crop or a side part with fullness over the ears works well. Very tall styles such as high pompadours or tight top knots add height, so they are worth trying only if you like that effect.
Glasses: wider and deeper frames
Frames that are wide, or that have decorative temples and a strong brow line, add width across the face. Round, square with softened corners, and oversized shapes can all look balanced, and a lower, deeper frame also takes up more of the vertical space.
Very narrow or small frames can make the face look longer, so they are best chosen only if that is the look you want. Check that the frame width roughly matches the widest part of your face so it neither pinches nor overhangs.
Brows and makeup: horizontal lines
Soft, fairly straight brows with a gentle arch keep the eye moving sideways, while very high, sharp arches add height. Blush applied slightly outward along the cheekbones, instead of high toward the temples or low on the cheek, can echo that width.
Contour and bronzer can be placed across the top of the forehead and just under the chin to visually shorten length if you wish. For beards, a fuller beard at the sides with a shorter chin length keeps the focus off the vertical; a long, pointed beard stretches the face downward.
Accessories, hats and photos
Wide earrings, chunky studs, scarves and collars with volume add horizontal interest. Hats with a brim or a medium crown work well, whereas very tall crowns add height.
In photos, a small tilt of the chin down and a camera at eye level avoid exaggerating length; selfies taken from below tend to stretch the face. Good posture, with relaxed shoulders, also helps the overall line look balanced.
Oblong face shape FAQ
References
- Kartynnik, Y., Ablavatski, A., Grishchenko, I., & Grundmann, M. (2019). Real-time facial surface geometry from monocular video on mobile GPUs. arXiv:1907.06724. arxiv.org/abs/1907.06724
- Farkas, L. G., Hreczko, T. A., Kolar, J. C., & Munro, I. R. (1985). Vertical and horizontal proportions of the face in young adult North American Caucasians: Revision of neoclassical canons. Plastic and Reconstructive Surgery, 75(3), 328–337. doi.org/10.1097/00006534-198503000-00005
- Little, A. C., Jones, B. C., & DeBruine, L. M. (2011). Facial attractiveness: Evolutionary based research. Philosophical Transactions of the Royal Society B, 366(1571), 1638–1659. doi.org/10.1098/rstb.2010.0404